Quantcast
Channel: Automotive Repair Manual Download and Reviews » Dodge
Viewing all articles
Browse latest Browse all 10

Dodge Ram Replace the Serpentine Belt Procedures

0
0

The principle drive belt or serpentine belt is necessary on any automobile, however some have multiple belt to drive parts from the crankshaft. The Dodge Ram and comparable truck type have one true serpentine belt, a multi-ribbed belt that matches into grooves on varied pulleys, that Dodge suggests inspecting for put on each 15,000 miles or 12 months.

Dodge Ram Replace the Serpentine Belt Instructions

Disconnect the negative battery terminal. As a result of the electrical fan can begin even with out the car working, some mechanics recommend disconnecting the battery terminal whereas working in the serpentine belt space.

Find the serpentine belt tensioner pulley. The belt tensioner pulley may have a bolt on its aspect. On some Dodge Ram type, the tensioner is immediately beneath the air conditioner compressor pulley; search for it above the crankshaft pulley.

Rotate the tensioner pulley by turning the bolt, both with a wrench for some type or a breaker bar or ratchet for different type. Slip off the belt and let the tensioner return to its place.

Use a belt routing diagram to suit the new belt over the pulleys, ensuring the ribs are lined up with the grooves for every pulley. Dodge usually features a belt routing diagram on the higher radiator panel or the same spot below the hood.

Rotate the tensioner once more to permit the new belt to slide onto all pulleys. Verify to ensure it’s seated proper on all pulleys with the ribs in the grooves. Re-join the battery terminal. Run the engine and observe the belt for correct functioning.

[source ehow.com]


Viewing all articles
Browse latest Browse all 10

Latest Images

Trending Articles





Latest Images